These can be installed on 2”-4” sch-40 pipe, flat surfaces, and 25G ROHN tower frame. Customer Support Tamarack Solar makes every effort to ensure your mounting kit is easy to install. If you need assistance at any point with your installation or have suggestions on how we can improve your experience, call our customer support at 1-800-819-7236 or email us at info@tamaracksolar.com.
Installation Manual SP-KNBR-001 Step 1. Attaching Swivel Bracket to Panel Support A. Using a 1/4-20 x 3/4” bolt and flat washer, attach the bracket to the inside end of the panel support in the hole as shown. B. Repeat on the opposite panel support, leave brackets “finger tight” for final adjustment of the knee brace assembly.
Installation Manual SP-KNBR-001 Step 3. Attaching Inner\outer Brace Channels A. Loosely attach the outer channel to the Knee bucket as shown B. Loosely attach the inner channel to the swivel bracket as shown C. Align the inner channel inside the outer channel and align the holes to install the bolts D.
The warranty does not cover any defect that has not been reported in writing to Tamarack Solar within ten (10) days after discovery of such defect. Furthermore, it does not cover units that have been altered, modified or repaired without written authorization from the manufacturer or its authorized representative, or units used in a manner or for a purpose other than that specified by the manufacturer.