Table Of Contents; Introduction…….……………….……………………………………………………………………………………&; Customer Support ………………………………………………………………………………………………………&#X8 - Tamarack Solar LTP HW Mount Series Installation Manual

Purpose
This instruction manual, and the associated parts listed, is to be used as a replacement for the
instruction manual that came with the LTP LCR/124HW pole top mount kit. When installing the LTP
LCR/124HW with this High Load kit, disregard the instruction manual that came with the basic mount
and follow the instructions in this

Table of Contents:

Introduction…….……………….………………………………………………………………………………………………………………….... 1
Customer Support …………………………………………………………………………………………………………………………….……. 1
Tools Required ...…………………………………………………………………………………………………………………………............. 2
Components List ........................................................................................................................................... 2
Step 1: Pre Assembling the Aluminum PV Module Support Rails ................................................................ 4
Step 2: Pre Assembling the Galvanized Steel Cross Rails ............................................................................. 6
Step 3: Pre Assembling the Aluminum Upper Cross Rail ............................................................................. 8
Step 4: Connecting PV Modules to Module Support Rail assemblies .......................................................... 9
Step 5: Attach Pole Clamp Assembly to Top of Pole .................................................................................. 11
Step 6: Attach Tilt Plate Mounting Channels ............................................................................................. 12
Step 7: Attach Tilt Plates ........................................................................................................................... 13
Step 8: Attach Cross Rails to Tilt Plates ..................................................................................................... 13
Step 9: Attach PV Module Support Rail Sub Assemblies to Cross Rails ...................................................... 14
Step 10: Install Upper Cross Brace and Knee Brace Rails ....…………………………………………………….……………… 17
Step 11: Adjust Tilt Angle …………………………………………………………………………………………………………………….… 19
Step 12: Install Lower Knee Brace .………………………………………………………………………………………...........………. 19
Foundation Hole Guidelines ....................................................................................................................... 24
Installer Responsibility ............................................................................................................................... 26
Warranty Information ............................................................................................................................... 26
Introduction
The LTP LCR/124HW Top of Pole Mount with added High Load Kit is an extremely sturdy, universal pole
mounting solution designed for mounting six 60 or 72 cell solar photovoltaic (PV) modules (41” module
width maximum) With its user adjustable angle settings (0° to 60° in 10° increments), the Top of Pole
Mount can support installations in a wide range of locations.
Customer Support
Tamarack Solar makes every effort to ensure your mounting kit is easy to install. If you need assistance
at any point in your installation or have suggestions on how we can improve your experience, call
technical support at 1 800 819 7236 ext. 556 or email us at support@tamaracksolar.com
manual.
1
LTP HW Mount Series