Tamarack solar 1.6 or 2.3 rails. Customer Support Tamarack Solar makes every effort to ensure your mounting kit is easy to install. If you need assistance at any point in your installation or have suggestions on how we can improve your experience, call customer support at 1-800-819-7236 ext 556 or email us at support@tamaracksolar.com...
Installation Manual 10° tilt leg kit Components List ITEM PART NUMBER DESCRIPTION QTY. 51-0510-000 CHANNEL, 10.5" REAR LEG 51-0503-000 CHANNEL, 3.5" FRONT LEG 51-6000-003 U-Foot , Ground Mount s 89570 Mount Adapt er 23-3118-021 Bolt , 5/16-18 x 3/4 SST 25-3102-000 Washer, flat 5/16"...
Installation Manual 10° tilt leg kit Step 1. Determine foot spacing front to rear A. The top down clamping areas on panels generally need to correspond with their mounting hole locations. The following is a general location and angle reference guideline. “C”...
Installation Manual 10° tilt leg kit Step 4. Attach front and rear legs to the U-foot A. With the channel open side facing the front (south) loosely assemble the front and rear legs to the U-foot. (the short leg in front and the long leg on the rear) the flange nuts to be on the inside as shown.
Installation Manual 10° tilt leg kit Step 6. Install mount adapters and rails (Rails, channel clamps, 5050 clamps, splices, lead-clips, endcaps etc. purchased separately) A. Loosely install the mount adapters to the top hole on the front and rear legs, leaving about a 1/4" space between the leg and adapter as shown.
Tamarack Solar by Purchaser, any employee of Purchaser, client of Purchaser, end-user of the Product or other party, even if Tamarack Solar has been advised of the possibility of such claims or demands (collectively, “Third Party Claims”). This limitation applies to all materials provided by Tamarack Solar during and after the Warranty Period.