Tamarack Solar LTP HW Mount Series Installation Manual page 22

F. Loosely attach the two 39.5” Outer Knee Brace Channels to the Outer Swivel Brackets on the Lower
Knee Brace Clamp (on the pole), with the open sides facing in, as shown in Detail W, using the
5/16” 18 x 3.5” bolts, flat washers, and flange nuts.
Detail W:
G. Loosely attach the 39.5” Inner Brace Channels to the Inner Swivel Brackets on the Knee Brace Rail,
open side facing in, with 5/16” 18 x 3.5” bolts, flat washers, and flange nuts, as shown in Detail X.
Detail X:
21
LTP HW Mount Series