Loading Dip Samples - Thermo Scientific DSQ Series User Manual

Loading DIP Samples

Thermo Scientific
Compare your results with
Figure 31. Qual Browse
For information on how to load samples see
probe tip see "Cleaning the DIP"
on page 38.
You can load either liquid or solid samples into your DIP. However, before loading samples
use these precautions to minimize contaminating the ion source.
1. Inspect the probe tip and the sample cup holder.
Clean the probe tip prior to loading the first sample. A given probe tip may be
contaminated by handling or from previous sample runs. For more detailed instructions,
see "Cleaning the DIP"
2. Handle sample cups with clean forceps.
a. Use one sample cup for each sample to avoid cross-contamination.
Figure 31.
: DSQ Series DIP
r
"Loading DIP Samples"
on page 37, and terms to know see
on page 37.
Ion Trap and DSQ Series Direct Probe System User's Guide
1
Using a Direct Insertion Probe (DIP)
Loading DIP Samples
on page 35, clean the
"Top Terms To Know"
35