Handlebar Switches - KYMCO Zing 125 Service Manual

18
. LIGHTS/INSTRUMENTS/SWITCHES/HORN

HANDLEBAR SWITCHES

FRONT STOP SWITCH
Disconnect the front stop switch wire
coupler.
Check for continuity between the front stop
switch wires.
Brake lever applied: There is continuity.
Brake lever released: There is no continuity.
REAR STOP SWITCH
Remove the right side cover.
Disconnect the rear stop switch wire coupler.
Check for continuity between the rear stop
switch wires.
Brake pedal depressed: There is continuity.
Brake pedal released: There is no continuity.
TURN SIGNAL SWITCH
Disconnect the turn signal switch wire
coupler.
Check for continuity between the turn signal
switch wires.
Color
Orange
Position
R
○ ○ ○ ○
L
HEADLIGHT SWITCH
Disconnect the headlight switch wire coupler.
Check for continuity between the headlight
switch wires.
Color
Black
Position
○ ○ ○ ○
P
○ ○ ○ ○
H
Gray Light Blue
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○
Brown Blue/White
○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
Front Stop Switch
Rear Stop Switch Wire
Gray
Light Blue Orange
Blue/White
Black
Brown
Turn Signal Switch
Headlight Switch
18-4