KYMCO Zing 125 Service Manual page 121

12
. REAR WHEEL/BRAKE/SUSPENSION
ASSEMBLY
Assemble the rear shock absorbers in the
reverse order of disassembly.
＊ ＊ ＊ ＊
• Apply locking agent to the lock nut
threads and tighten the lock nut.
• Install the shock absorber spring with
closely wound coils facing up.
Torque: 1.9～2.8kg-m
INSTALLATION
Depress the motorcycle to install the left and
right rear shock absorbers.
Tighten the shock absorber upper mount nuts
and lower mount bolts.
Torque: 3.0～4.0kg-m
REAR FORK
REMOVAL
Remove the rear wheel. (Refer to 12-3.)
Remove the rear shock absorbers. (Refer to
12-8.)
Remove the rear fork pivot nut to remove the
pivot and rear fork.
Remove the drive chain slider and check for
wear or damage.
＊ ＊ ＊ ＊
After the rear fork pivot bushings are
replaced, press in the bushings to make
them flush with the rear fork.
12-9
Lower Mount Bolt
Pivot Bushings
Upper Mount Nut
Rear Fork Pivot Nut
Slider