KYMCO Zing 125 Service Manual page 119

12
. REAR WHEEL/BRAKE/SUSPENSION
Apply grease to the brake cam and anchor
pin, then install the brake cam to the brake
panel.
Apply engine oil to the oil seal and install it
to the brake cam.
Install the brake arm onto the brake cam,
aligning the punch mark on the cam with the
punch mark on the arm.
Install and tighten the brake arm bolt.
Torque: 0.8～1.2kg-m
INSTALLATION
Install the brake panel and rear wheel in the
reverse order of removal.
＊ ＊ ＊ ＊
After the rear wheel installation, check
the drive chain tension and rear brake
pedal free play.
12-7
Brake Cam
Grease
Brake Panel
Oil Seal