Headlight - KYMCO Zing 125 Service Manual

18
. LIGHTS/INSTRUMENTS/SWITCHES/HORN

HEADLIGHT

REMOVAL
Remove the headlight band screw to remove
the band.
Remove the headlight unit and disconnect
the headlight wire coupler.
Remove the headlight bulb and bulb socket.
Check the bulb for damage and replace with
a new one if necessary.
INSTALLATION
Install the headlight in the reverse order of
removal.
＊ ＊ ＊ ＊
After installation, adjust the headlight
beam.
INSTRUMENT (SPEEDOMETER)
REMOVAL
Disconnect the speedometer cable.
Disconnect the speedometer bulb wire
coupler.
Remove the two bolts attaching the
speedometer seat.
Remove the speedometer.
INSTALLATION
The installation sequence is the reverse of
removal.
18-1
Bolt
Bulb Socket Headlight Unit
Instrument
Speedometer Cable
Bulb
Bolt