Initial Installation Of Printer; Level Adjustment - Brother GTX600NB Instruction Manual

3-2. Initial installation of printer

Please refer to the Setup Manual for the following initial installation procedures:

Main tank unit

Print switch

Waste ink tank/Waste water tank

Humidifier pipe

Carriage belt tension adjustment

Humidifier water supply tube

Water supply tank (optional item)

Turning on the power

3-2-1. Level adjustment

Prepare a level gage and a 1.4-in. (35-mm) wrench.
(1) On the operation panel, press
(2) Place a level gage on the top surface of the platen.
(3) Adjust the level by rotating the lower nuts that secure the legs (4 points) so that the main unit is set horizontally level
while checking the level gage.
<IMPORTANT>

Adjust so that the adjusters protrude 4.9 in. (125 mm) or less from the bottom of the frame.
, and move the platen toward the front of the printer.
3-3
Installation and preparation
4.9 in. (125 mm)
or less