Brother GTX600NB Instruction Manual page 278

Error code Error message
[USB flash drive Not
2100
Ready]
2101 [Not Enough Area]
2102 ― (Log only)
2105 [No Files Detected]
[Receiving History W/O
2110
Error1]
[Activate Print Data Auto
2120
Delete]
[Detected refilling of ink
2230
tank]
[Detected refilling of ink
2231
tank]
[Detected refilling of ink
2232
tank]
[Detected refilling of ink
2233
tank]
[Detected refilling of ink
2234
tank]
[Detected refilling of ink
2235
tank]
Description
No USB flash memory has
been inserted into its
insertion slot.
Writing is not possible
because there is not enough
free space in the USB flash
memory.
The USB flash drive cannot
be recognized.
No target file exists in a USB
flash memory.
There has been no receiving
history since the power was
turned on.
Because the Print Data Auto
Delete Enable function
remains active, no receiving
history menu is available.
Black ink was refilled to the
main tank in an incorrect way.
Magenta ink was refilled to
the main tank in an incorrect
way.
Cyan ink was refilled to the
main tank in an incorrect way.
Yellow ink was refilled to the
main tank in an incorrect way.
White ink was refilled to the
main tank in an incorrect way.
Cleaning solution was refilled
to the main tank in an
incorrect way.
9-7
Remedy
Insert a USB flash memory into the slot, wait for
a couple of seconds, and perform the operation.
Insert a USB flash memory into the slot again.
If the problem persists, check on the format and
type of the USB flash memory.
Use your PC to check free space on the USB
flash memory.
Insert the USB flash memory that has enough
free space into the slot.
If the problem persists even after reactivating
the printer, please contact your dealer.
Connect the USB flash memory to your PC for
checking the information stored in it.
If you have a saved file (ARX6 file or ARXP file
or ARX4 file) in the USB flash memory, check
the contents of the USB flash memory with a file
viewer.
Press the OK button to clear the error.
Press the OK button to clear the error.
When you use the receiving history, disable the
Print Data Auto Delete option.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Refill the ink following the on-screen
instructions.
To refill the ink, be sure to select the [Ink refill]
menu item.
Error message