Table of Contents
Advertisement
(6)
Remove each tube from the print head to be replaced with a new one. Then attach each of the new caps which are
removed from a new print head to each tube, while exercising care to prevent any ink from being spilled.
<IMPORTANT>
Care is needed in preventing any ink from being spilled from each tube. If the ink is dripping, wipe off the dripping ink.
<NOTE>
For a proper work operation, be sure to wear the printer-provided gloves.
Cap
(7)
Remove the latch on the carriage board cover and open the cover.
(8)
Remove the head board of the corresponding print head.
<CAUTION>
Be sure not to touch other boards.
Head board
(9)
Remove the hook and clamp and disconnect the flat cable.
Hook
Precautions to keep good printing quality/use printer over the long term
Tube
Latch
6-33
Print head
Tube
Head board
Flat cable
Clamp
X1005
Advertisement
Table of Contents
Troubleshooting
