Brother GTX600NB Instruction Manual page 29

Liquid crystal panel
The picture shown below indicates a state under which the printer has received print data. On this screen, the printer's
current state and necessary information for printing are displayed.
2
No. Indications
1 Preview image
Remaining cleaning solution
2
volume indication area
Remaining ink volume
3
indication area
Waste ink tank replacement
4
indication
5 Ink volume to be used
6 Auto-Cleaning
7 Warning mark
1
3 4
The preview display screen of received print data is shown in this window. The
preview display screen shown here is indicated upside down as opposed to the
page orientation (the upper side of the preview image is oriented toward the front
of the printer main unit).
Furthermore, it is possible to change the direction of the preview display screen
as well.
In this area, the current remaining cleaning solution volume in the tank is
displayed.
In this area, the current remaining ink volume of each tank is displayed.
In the left-to-right order, the remaining ink volume in the black (K), yellow (Y),
cyan (C), magenta (M), and white (W) ink cartridges are shown here.
: The remaining ink volume is running low. Make ink available for use in the
next printing session.
: Ink has been depleted.
This indication shows a guideline for replacing the waste ink tank.
The required ink volume (cc) for printing out one sheet of the received print data
is displayed here.
(CMYK + White)
Head cleaning is automatically performed every time a predetermined number of
sheets are printed in order to provide stable printing quality.
This mark appears when any warning is issued. Pressing
current screen to move to the warning screen where the applicable warning
message is indicated.
1-15
Before Using Your Printer for the First Time
11
5
6
Function
*1
10
9
8
7
causes the