Sending Print Data From Applications - Brother GTX600NB Instruction Manual

5-6-2. Sending print data from applications

CorelDRAW
(1) In the menu bar, select [File] > [Print].
(2) Open the [Color] tab, and make the following settings:

Place a checkmark in the [Document color] checkbox.

[Color conversions]: "Brother GTX-6" or "Brother GTX-6 FileOutput"

[Color Profile]: [sRGB IEC61966-2.1]

[Rendering intent]: [Relative colorimetric]
(3) Open [General] tab and select "Brother GTX-6" from [Printer].
<TIPS>

If the specified [Printer] is set to "Brother GTX-6", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX-6 FileOutput", the print data will be saved as an ARX6 file.
(4) On [Preferences], set up the printer driver and send the print data by clicking [OK] in the [Print] dialog box.
<TIPS>

How to set the printer driver
- For print data using white ink, ☞"4-4-1. Setting up the printer driver >> P.4-22"
- For print data using color ink and black ink only, ☞"4-5-1. Setting up the printer driver >> P.4-39"

Clicking on [OK] will not start the print operation of the printer itself. The print button of the printer should be pressed to start
the printing operation.
5-24
Basic printing procedures