Installation Of Printer - Brother GTX pro Instruction Manual

4-1. Installation of printer

Please refer to the Setup Manual included with the printer, for details of unpacking procedures and installation
procedures of accessories.
For an installation site of the printer, please bear the following points in mind:

When installing the printer, avoid any place that presents direct sunlight or a large amount of dust.

The body size is 55.1 in. (width) x 51.2 in. (depth) x 21.7 in. (height) (140 cm (width) x 130 cm (depth) x 55 cm
(height)). The main unit weighs 128 kg (282 lb).

The right-and-left width of the legs is 34.1 in. (86.7 cm) while the front-to-rear width is 16.7 in. (42.3 cm). The
diameter of the legs is 1.57 in. (40 mm).

The height from the table to the top surface of the platen is approx. 12.6 in. (32 cm).

Do not use any extension cable.

As workspace in front of and on both sides of the printer, always keep 39.4 in. (100 cm) or wider space around it
from obstruction. Also, as a space to install the rear cover, keep 15.7 in. (40 cm) or wider clearance at the back
of the printer. Keep 17.7 in. (45 cm) or wider space free above the unit as well. As the air is exhausted toward
the rear side, keep 7.9 in. (20 cm) or more space open behind the exhaust opening. If this space is not secured,
you will have to move peripherals or the printer when making a repair.

Be sure to use a table that supports the printer should be at least 35.4 in. (90 cm) in width and 23.6 in. (60 cm) in
depth, and its top plate should be level and should be able to bear a weight of 150 kg (330 lb) or more without
rattling the printer when in operation.

When installing the printer, place a level gauge on the top surface of the cover and the top surface of the platen
to make adjustments so that the main unit is set horizontally level.

In preparation for a major earthquake or other natural disasters, fix the table and the main unit with a tool like a
fixing band to prevent the main unit from falling from the table.
Printer installation dimensions
106.3 in. (270 cm) or more
133.9 in. (340 cm) or more
17.7 in. (45 cm) or more
39.4 in. (100 cm)
or more
39.4 in. (100 cm)
or more
35.4 in. (90 cm) or more
38
Installation and preparation
Exhaust opening
15.7 in. (40 cm) or more
39.4 in. (100 cm) or more
23.6 in. (60 cm) or more
Exhaust
X0310