Cleaning; Cleaning The Nozzle Guard And Suction Cap - Brother GTX600NB Instruction Manual

6-2. Cleaning

6-2-1. Cleaning the nozzle guard and suction cap

When a warning message appears in the warning message window, perform the cleaning.
In the event that maintenance has been performed inadequately, a printed material may be soiled with waste ink during
a print session or a printed surface quality may deteriorate.
(1) Make the clean stick R, clean stick T, cleaning cup, gloves and cleaning solution, which come standard with the
printer, available for use.
(2) From the menu, select [Maintenance] > [Maintenance Part Clean/Replace] > [Clean nozzle guard and cap], and
press .
(3) Select in response to the instructions on the screen.
<IMPORTANT>

If any other error or message is displayed on the operation panel or warning message window, follow the message to solve
the problem, then perform the cleaning.
<TIPS>

Pressing
(4) Follow the on-screen message and start working.
<IMPORTANT>

Please complete the task within 15 minutes, in order to prevent the print heads from drying up.

Then, the head cleaning can be performed to prevent any ink from drying up.
Precautions to keep good printing quality/use printer over the long term
! WARNING
Clean cap
Please Clean Nozzle Guards
causes the platen to start moving. Do not put anything around the platen.
6-46