Print Out The Nozzle Check Pattern (Checking On The Print Heads) - Brother GTX600NB Instruction Manual

6-1-17. Print out the nozzle check pattern (checking on the print heads)

By printing out a nozzle check pattern, you can check on the printing quality.
It is recommended to always perform this procedure to verify the output.
<TIPS>

The serial number, firmware version, print date (day/month/year), time, temperature, humidity, and the number of copies
printed are printed at the bottom of the nozzle check pattern.
The date and time will be printed in Coordinated Universal Time with "(UTC)" printed at the end if time adjustment as a
maintenance tool has not been made. You can print the date and time according to your environment by making time
adjustment. ☞"3-6-7. Setting of the time displayed on the nozzle check pattern >>P.3-30"
(1) Put the platen 14×16 in place, and position its level at "A".
☞"5-4-1. Replacing the currently used platen with another one >>P.5-14" and "5-4-2. Platen height adjustment
>>P.5-16"
(2) As illustrated below, put the A4-size or letter-size white paper on the platen in alignment with the right-hand corner
of the platen at its front edge.
When the paper is loosely fitted, fix its edge with a tape or the like.
A T-shirt can also be used instead.
<TIPS>

When printing out a nozzle check pattern on the white side, print it on a pretreated black or dark color textile or black paper,
or a transparent sheet (such as OHP sheet).
Platen
From the menu, select [Test Print] > [Nozzle Check CMYK], and press
(3)
Then, printing will begin.
(4) After printing on the color side is completed, remove the printed paper and replace it with a paper for printing on the
white side.
From the menu, select [Test Print] > [Nozzle Check White], and press
(5)
Then, printing will begin.
Precautions to keep good printing quality/use printer over the long term
Paper
6-44
.
.
X1022