Brother GTX600NB Instruction Manual page 84

Create print data (ARX6 file)
Save the image data and print settings as a set of print data in ARX6 file format.
The following will be made available if the print data is converted into an ARX6 file:

Image data and print settings can be put together and stored.

Without connection to a PC, the printing can be performed directly from a USB flash memory.
<TIPS>

Image editing is unavailable for any ARX6 file. As such, save your image data for an editing purpose in advance.

For file output, there are some cases where neither file output destination nor extension cannot be specified by the [Print to file]
command. Be sure to use the printer driver "Brother GTX-6 FileOutput".

For details of directly sending data to the printer from an application, ☞"5-6-2. Sending print data from applications >>P.5-24"
(1) In the menu bar, select [File] > [Print].
(2) Open the [Color] tab, and make the following settings:

Place a checkmark in the [Document color] checkbox.

[Color conversions]: "Brother GTX-6" or "Brother GTX-6 FileOutput"

[Color Profile]: [sRGB IEC61966-2.1]

[Rendering intent]: [Relative colorimetric]
(3) On [General] tab, select [Printer] and select "Brother GTX-6 FileOutput" for file output.
<TIPS>

If the specified [Printer] is set to "Brother GTX-6", the print data will be sent to the printer.
If the specified [Printer] is set to "Brother GTX-6 FileOutput", the print data will be saved as an ARX6 file.
(4) On [Preferences], create your settings of printer driver.

In the case of print data using white ink ☞"4-4-1. Setting up the printer driver >>P.4-22"

In the case of print data using color ink and black ink only ☞"4-5-1. Setting up the printer driver >>P.4-39"
4-7
Creating print data