Basic Printing Procedures - Brother GTX600NB Instruction Manual

5

Basic printing procedures

Chapter5
WARNING
If a foreign object gets inside the printer, immediately turn off the power, disconnect the power cord, and
contact the place of purchase or a qualified technician. If you continue to use the printer while there is a
foreign object inside, it may result in fire or electric shocks or problems with correct operation.
Do not allow the printer to come into contact with liquids. Otherwise it may cause fire or electric shocks or
problems with correct operation.
If any liquid gets inside the printer, immediately turn off the power, disconnect the power cord, and contact the
place of purchase or a qualified technician.
Do not use the printer when smoke or a bad odor is coming from the printer. Otherwise it may cause fire or
electric shocks or problems with correct operation. Immediately turn off the power, disconnect the power
cord, and contact the place of purchase or a qualified technician.
Keep your finger or any body part away from the rotating fan. Otherwise it will be caught up, which results in
injuries.
Turn off the power when you approach the fan.
CAUTION
This printer should only be used by operators who are appropriately trained in its safe operation.
Ensure there is adequate space left in front of the printer and avoid placing any objects. Otherwise your hand
may get caught between the platen and an object, which may result in injury.
Do not handle the platen while printing. If your hand gets caught between the platen or the T-shirt tray and
the covers, it may be injured.
Do not put your hands inside the covers while the printer's power is turned on. Otherwise your hands may
touch against moving parts and this may result in injury.
Do not drink liquids such as the ink, maintenance solution, cleaning solution, pretreatment, or waste. They
may cause diarrhea or vomiting.
When handling liquids, such as the ink, maintenance solution, cleaning solution, pretreatment, and waste ink,
use protective glasses and gloves to avoid causing your eyes and skin to contact the liquids. It may cause
inflammation. In case of contact with eyes, do not rub but immediately rinse the eyes with water.
Keep the liquids out of the reach of children.
When the pretreatment is applied to printed objects (like a T-shirt) with a spray or pretreatment applicator,
sprayed mist is generated. So wear a pair of plastic gloves, a mask and protective glasses (or goggles)
designed to shield against liquid splash, and fully take care of the air ventilation when you are working with it.
When a problem occurs with the operation of the printer, contact the place of purchase or a qualified
technician.
5-1