Brother GTX600NB Instruction Manual page 276

Error code Error message
1500 [Replace mist fan filter]
1501 [Replace mist fan filter]
1600 [Replace flushing foam]
1601 [Replace flushing foam]
1801 [None after head change]
1802 [None after head change]
1803 [None after head change]
1804 [None after head change]
[Perform Initial Ink
1901
Installation]
1902 [Install initial ink (KYCM)]
1903 [Install initial ink (W)]
[Attach maintenance
1910
parts]
[Time for technical
1922 maintenance
Contact service engineer]
[Time for technical
1924 maintenance
Contact service engineer]
[Time for technical
1925 maintenance
Contact service engineer]
Description
The mist fan filter needs to be
replaced.
The mist fan filter needs to be
replaced.
The flushing foam needs to
be replaced.
The flushing foam needs to
be replaced.
Because color head A has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Because color head B has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Because white head A has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Because white head B has
been replaced, the Install Ink
after Replacing Head
function needs to be put into
execution.
Initial ink installation has not
been performed yet.
Initial ink installation for the
color heads has not been
performed yet.
Initial ink installation for the
white head has not been
performed yet.
Maintenance unit parts are
not installed.
Periodical maintenance and
inspection are needed now.
Periodical maintenance and
inspection are needed now.
Periodical maintenance and
inspection are needed now.
9-5
Remedy
Select the [Replace mist fan filter] menu item
and replace the mist fan filter.
Select the [Replace mist fan filter] menu item
and replace the mist fan filter.
Select the [Replace maintenance unit parts]
menu item and replace the flushing foam.
Select the [Replace maintenance unit parts]
menu item and replace the flushing foam.
Select the [Install Ink after Replacing Head]
menu item to install the ink for color head A.
Select the [Install Ink after Replacing Head]
menu item to install the ink for color head B.
Select the [Install Ink after Replacing Head]
menu item to install the ink for white head A.
Select the [Install Ink after Replacing Head]
menu item to install the ink for white head B.
Select the [Initial Ink Installation] menu item to
implement initial ink installation.
Install color ink using the [Initial Ink Installation]
menu item and complete the process.
Install white ink using the [Initial Ink Installation]
menu item and complete the process.
Refer to the Setup Manual and use the
[Replace maintenance unit parts] menu item to
install wipers, flushing foam, carriage foam, etc.
For help, please contact your dealer.
For help, please contact your dealer.
For help, please contact your dealer.
Error message