Maintenance; Cabinet Cleaning; Condenser - Fisher Scientific Isotemp 148 Instruction Manual

General purpose and flammable materials storage refrigeration
Table of Contents

Advertisement

7 of 8
Page

Maintenance

Cabinet Cleaning

Condenser

CAUTION: When servicing the unit, disconnect from
the electrical power source
The cabinet interior should be cleaned frequently. Any spilled
liquid should be wiped off immediately. Stains resulting from
some spills can be permanent if not quickly removed. The
most convenient time to clean the interior is after defrosting.
The cabinet exterior should be cleaned occasionally. A mild
detergent and lukewarm water or a solution of bicarbonate of
soda (1 tablespoon per gallon of water) is recommended for
cleaning the interior and exterior of the cabinet. All surfaces
should be rinsed and thoroughly dried.
CAUTION: Do not use any type of abrasive such as
steel wool, or fluids such as gasoline, Naphtha, and thinner.
These materials could be harmful to aluminum, plastic
materials, door gasket, and painted surfaces.
The condenser coil is located behind the sides and rear
exterior panel. These surfaces may be warm to the touch.
This is necessary to the operation of the refrigeration
equipment and is normal.
Isotempâ GP & FMS Refrigeration

Advertisement

Table of Contents
loading

Table of Contents