Maintenance; Cleaning Product - Fisher Scientific Fisherbrand Isotemp RT AVCD HPS Advanced Operation Manual

Cleaning Product

Maintenance

Section 6
Item
Connection status of power cord or plug
Damages in power cord or plug
Damages or cleanliness of top plate
Cleanliness of main body and accessories
Damages in switches, buttons, LED's, dial
knobs
Heating capability check (up to 350℃ )
Stirring capability check (up to 2000 rpm)
Assembly status of all parts or accessories
• Never immerse this unit in water or any other liquid.
• Do not allow any liquid or wet material to get inside the unit when
cleaning.
• Do not reconnect this unit to power outlets until all cleaned surfaces
have dried.
• Do not use chlorine bleach, ammonia-based cleaners, abrasives,
ammonia, or metal scouring pads when cleaning.
• During cleaning and general operation, take care not to scratch the
surface of the ceramic-coated top plate as this could result in
subsequent thermal breakage.
Inspection Interval
Daily Weekly
●
●
●
●
●
●
●
●
6-1
Section 6
Maintenance