Table of Contents
Advertisement
Section 4 Safety Tips and Maintenance
Safety Tips
1. Use independent power supply.
2. Check if the local power supply voltage is suitable for use.
3. Do not drag the power supply cable when unplugging.
4. Do not use non-specified power cable or damage cable.
5. Service should only be performed by a qualified
professional.
6. The power supply must be unplugged under the following
situations:
a. When the unit is moved
b. When the electrical cabinet or the moving component is
opened
c. When the equipment is malfunctioning
d. When the equipment is not in use
Maintenance
Instrument case and tray surface can be cleaned with cloth
with mild detergent and water.
Surface of the dimpled rubber mat can be cleaned with mild
detergent or water and then wiped with clean cloth.
Warning: Avoid dripping detergent or water into the
inside of the instrument during cleaning.
Clean Spill
If accidental spillage of liquids caused by mishandling
or contained breakage occurs on the surface of the
instrument, please shut down the instrument and clean
up the liquid immediately.
If the liquid has already spilled into the unit, cut off the
power supply first and immediately clean up the liquid
at the surface of the instrument. Place the instrument in
a ventilated and dry environment for 24 hours before
reuse. If the instrument is not functioning after drying
for 24 hours, please contact the manufacturer.
Warning: Disassembling/Assembling without a
qualified professional's guidance may cause
malfunctioning of the instrument.
10
Advertisement
Table of Contents
