Table of Contents
Advertisement
1 of 8
Page
Introduction
Unpacking
Visible Loss or Damage
Your satisfaction and safety are important to Fisher Scientific
and a complete understanding of this unit is necessary to
attain these objectives.
As the ultimate user of this apparatus, it is your responsibility
to understand its proper function and operational
characteristics. This instruction manual should be thoroughly
read and all operators given adequate training before
attempting to place this unit in service. Awareness of the
stated cautions and warnings, and compliance with
recommended operating parameters – together with
maintenance requirements – are important for safe and
satisfactory operation. The unit should be used for its
intended application; alterations or modifications will void
the Warranty.
WARNING: As a routine laboratory precaution,
always wear safety glasses when working with this apparatus.
This product is not intended, nor can it be used, as a sterile or
patient connected device. In addition, this apparatus is not
designed for use in Class I, II or III locations as defined by
the National Electrical Code, unless otherwise noted.
Save all packing material if apparatus is received damaged.
This merchandise was carefully packed and thoroughly
inspected before leaving our factory.
Responsibility for its safe delivery was assumed by the carrier
upon acceptance of the shipment; therefore, claims for loss or
damage sustained in transit must be made upon the carrier by
the recipient as follows:
Note any external evidence of loss or damage on the freight
bill, or express receipt, and have it signed by the carrier's
agent. Failure to adequately describe such external evidence
of loss or damage may result in the carrier's refusing to honor
your damage claim. The form required to file such a claim
will be supplied by the carrier.
Isotempâ GP & FMS Refrigeration
Advertisement
Table of Contents
