Table 4.1 Ldx-32420 Series Device-Dependent Commands - ILX Lightwave LDX-32420 User Manual


This chapter is a guide to all of the device-dependent commands for the
LDX-32420 High Power Precision Current Source. It is divided into two parts; a
command list and a command reference. Table 4.1 lists all of the device
dependent commands. The remainder of the chapter describes each command in
alphabetical order with the command name, path, parameters and examples.

Table 4.1 LDX-32420 Series Device-Dependent Commands

Name
DELAY
ERR?
LAS:CALMD
LAS:CALMD?
LAS:CAL:LDI
LAS:CAL:LDI?
LAS:CAL:LDV
LAS:CAL:LDV?
LAS:CAL:MDI
LAS:CAL:MDI?
LAS:COND?
LAS:DEC
LAS:DIS
LAS:DIS?
LAS:DIS:LDI
C
OMMAND
Parameters Function
1 Used to create a delay in the execution of further
commands
NONE Returns errors generated since the last query
1 Used to set the CAL PD (monitor responsivity) constant
NONE Returns the CAL PD (monitor responsivity) constant
NONE Used to enter the laser current calibration mode
NONE Returns the ready state for entering the laser current
calibration value
NONE Used to enter the laser voltage calibration mode
NONE Returns the ready state for entering the laser voltage
calibration mode
NONE Used to enter the monitor photodiode current calibration
mode
NONE Returns the ready state for entering the monitor
photodiode current calibration value
NONE Returns the value of the LASER condition register
0, 1 or 2 Used to decrease the laser current setpoint value by
one or more steps
1 Turns the LASER display on or off
NONE Returns the LASER display value
NONE Turn on/off LASER display to show laser output current
4
C H A P T E R
R
EFERENCE
LDX-32420

41