ILX Lightwave LDX-32420 User Manual page 78

LASer:MODE:IHBW
Notes
Examples
LASer:MODE:ILBW
Notes
Examples
LASer:MODE:MDP
Notes
Examples
01_10
LDX-32420 Device-Dependent Command Reference
The LASer:MODE:IHBW command selects laser high bandwidth constant current mode.
This mode of operation is constant I mode with the output low pass filter disabled.
"LAS:Mode:Ihbw" - action: enables the laser high bandwidth constant current mode.
The LASer:MODE:ILBW command selects laser constant current mode.
Constant I mode (low bandwidth) enables the output low bandpass filter.
"LAS:MODE:ILBW" - action: sets the laser output for constant I mode (low bandwidth).
The LASer:MODE:MDP command selects laser constant power mode.
This mode of laser operation requires the laser's monitor photodiode feedback to
maintain constant optical power or constant monitor current.
In this mode, the displayed parameter will be either I
CALMD>0) in W.
"LAS:MODE:MDP" - action: sets the laser output mode of operation to constant optical
power mode.
C O M M A N D R E F E R E N C E
(if CALMD=0) in µA, or P
PD
4
C H A P T E R
F P
RONT ANEL
R
EMOTE
F P
RONT ANEL
R
EMOTE
F P
RONT ANEL
R
EMOTE
(if
PD
61
LDX-32420
