ILX Lightwave LDX-32420 User Manual page 67

4
C H A P T E R
LASer:DISplay:LDI
LASer:DISplay:LDI?
Notes
Examples
LASer:DISplay:LDV
LASer:DISplay:LDV?
Notes
Examples
50
 LDX-32420
C O M M A N D R E F E R E N C E
LDX-32420 Device-Dependent Command Reference
The LASer:DISplay:LDI command sets the laser display to show the constant current
measurement value.
The LASer:DISplay:LDI? query returns the status of the LDI measurement display mode.
- where the response is 0 or 1.
The LDI measurement display mode is turned off automatically when another display
selection is enabled.
In local operation, the status of the LDI measurement display mode is indicated by the
enunciator next to the display (A will be illuminated and not blinking when the display is in
LDI measurement mode).
"LAS:DIS:LDI" - action: enables the display for laser current values.
"LAS:DIS:LDI?" - response: 0, means that the LDI measurement is not displayed.
The LASer:DISplay:LDV command sets the laser display to show the laser forward
voltage measurement.
The LASer:DISplay:LDV? query returns the status of the LDV (laser diode voltage)
measurement display mode.
- where the response is 0 or 1.
The LDV measurement mode is turned off automatically when another display selection
is enabled.
In local operation, the status of the LDV measurement mode is indicated by the
enunciator next to the display (V will be illuminated when the display is in LDV
measurement mode).
"LAS:DIS:LDV" - action: enables the display for LDV measurement mode.
"LAS:DIS:LDV?" - response: 0, means that laser voltage measurement is not displayed.
F P
RONT ANEL
R
EMOTE
F P
RONT ANEL
R
EMOTE