ILX Lightwave LDX-32420 User Manual page 68

LASer:DISplay:MDI
LASer:DISplay:MDI?
Parameters
Notes
Examples
LASer:DISplay:MDP
LASer:DISplay:MDP?
Parameters
Notes
Examples
01_10
LDX-32420 Device-Dependent Command Reference
The LASer:DISplay:MDI command sets the laser display to show the monitor photodiode
current measurement.
The LASer:DISplay:MDI? query returns the status of the (LASER DISPLAY) I
- where the response is 0 or 1
None
The MDI measurement display is turned off automatically when another display selection
is enabled.
In local operation, the status of the MDI measurement mode is indicated by the
enunciator next to the display (µA will be illuminated and not blinking when the display is
in MDI measurement mode).
"LAS:DIS:MDI" - action: enables the display for photodiode current measurement
values.
"LAS:DIS:MDI?" - response: 0, means that the laser photodiode monitor current
measurement is not displayed.
The LASer:DISplay:MDP command sets the display to show the monitor photodiode
power measurement.
The LASer:DISplay:MDP? query returns the status of the MDP (monitor diode power)
measurement display mode.
- where the response is 0 or 1.
None
The MDP measurement display is turned off automatically when another display
selection is enabled.
In local operation, the status of the MDP measurement mode is indicated by the
enunciator next to the display (W will be illuminated and not blinking when the display is
in MDP measurement mode).
"Las:Display:MDp" - action: enables the display for photodiode power measurement
values.
"LAS:DISp:MDp?" - response: 0, means that the MDP measurement is not displayed.
C O M M A N D R E F E R E N C E
4
C H A P T E R
F P
RONT ANEL
R
EMOTE
switch.
PD
F P
RONT ANEL
R
EMOTE
51
LDX-32420
