CVM-E3-MINI
key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
Press the
screen.
Press the
key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the
To validate the value, press the
Press the
key to return to the initial IP address screen.
To access the following communications screen press the key
5�5�3� ETHERNET COMMUNICATIONS: IP MASK
You can set up (DHCP disabled) or view the IP mask on this screen.
Press the key
to display the value.
Press the
key for 3 seconds to enter the edit mode. The prog icon will flash on the left of the
screen.
Press the
key to modify the value of the flashing digit.
When the desired value is shown on the screen, use the
To validate the value, press the
Press the
key to return to the initial IP mask screen.
To access the following communications screen press the key
Instruction Manual
and
key for 3 seconds; the prog icon will stop flashing.
and
key for 3 seconds; the prog icon will stop flashing.
keys to move the edit cursor
.
keys to move the edit cursor
.
51
Need help?
Do you have a question about the CVM-E3-MINI and is the answer not in the manual?