System Settings Page Definitions; Security Settings - Grandstream Networks GSC35 Series User Manual

System Settings Page Definitions

Security Settings

Web/SSH Access
Enable SSH
SSH Port
Access Method
Port
User Info Management
Current Admin
Password
New Admin Password
Confirm Admin
Password
New User Password
Confirm New User
Password
SIP TLS
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Certificate Management
CA Certificate
Import Trusted CA
Certificates
Trusted CA Certificates
Enables/disables SSH access to the device. The default setting is "Yes".
Customizes the SSH port. By default, SSH uses port 22.
Determines which protocol will be used to access the device 's Web GUI.
It can be selected from HTTP and HTTPS. The default setting is HTTP.
Specifies which port to use to access the Web UI. By default, if HTTP, the
port number will be 80; if HTTPS is selected, the port number will be 443.
Enter current logged-in user's password. This field is case sensitive. The
default password is "admin".
Allows the user to change the admin password. The password field is
purposely blank after clicking the "Save" button for security purpose. This
field is case sensitive with a maximum length of 32 characters.
Enter the new Admin password again to confirm.
Allows the administrator to set the password for user-level web GUI
access. This field is case sensitive with a maximum length of 32
characters. The default password is "123".
Enter the new User password again to confirm.
Defines the SSL certificate used for SIP over TLS.
Defines the SSL Private key used for SIP over TLS.
Defines the SSL Private key password used for SIP over TLS.
Allows to upload the CA Certificate file to phone.
Note: Reboot is required to take effect.
Lists trusted CA certificates previously uploaded. Administrator can delete
a certificate from here.
GSC35XX Series User Manual
Version 1.0.0.15
P a g e | 72