System Settings Page Definitions; Time Settings; Security Settings - Grandstream Networks GSC35 Series User Manual

Bypass Defines the destination IP address where no proxy server is needed. The device will not use a proxy server
Proxy For when sending packets to the specified destination IP address.

System Settings Page Definitions

Time Settings

NTP Server
Enable Authenticated NTP
Allow DHCP Option 42 to Override NTP Server
DHCP Option 2 to Override Time Zone Setting
Time Zone
Date Display Format
Time Display Format

Security Settings

Enable SSH
SSH Port
HTTP Web Port
HTTPS Web Port
Web Access Mode
Table 26: Network Settings – Advanced Settings
Configures the URL or IP address of the NTP server. The phone may obtain
the date and time from the server.
Configures whether to enable NTP authentication. If enabled, a cryptographic
signature appended to each network packet. If the key is incorrectly
configured, the phone will refuse to use the time provided by the NTP server.
Default is Disabled
When enabled, DHCP Option 42 will override the NTP server if it is set up on
the LAN. Default is Enableld
Allows device to get provisioned for Time Zone from DHCP Option 2 in the
local server automatically. Default is Enabled
Specifies the local time zone for the phone. It covers the global time zones and
user can selected the specific one from the drop-down list.
Determines which format will be used to display the date.
It can be selected from the drop-down list:
● Normal (YYYY/MM/DD)
● MM/DD/YYYY
● DD/MM/YYYY
● DD, MM YYYY
The default setting is YYYY-MM-DD
Specifies which format will be used to display the time. It can be selected from
12-hour and 24-hour format.
Table 27: Time Settings
Web/SSH Access
Enables/disables SSH access to the device. The default setting is "Yes".
Customizes the SSH port. By default, SSH uses port 22.
Configures the HTTP port under the HTTP web access mode.
Configures the HTTPS port under the HTTPS web access mode.
Sets the protocol for the web interface.