Toro Greensmaster eFlex 1800 Diagnostic Manual page 84

Pin Identification
A
B
3. Check for a short condition between the following pairs of locations:
Location
1
2
1
2
Pass Circuit continuity tested good and no shorts are identified at the listed locations. Go
to Step 10.2 and follow the steps listed.
Fail For those items that failed, repair or replace worn or damaged parts as required. Go to
Returning the Equipment to Service (page 19)
Step 10.2: Check the battery wire harness for continuity and/or a short
condition.
1. Disconnect the battery wire harness P01 connector. Refer to
Connector (page 8).
2. Check for continuity between the following pairs of locations:
Figure 79
P26 Main Harness Pin Identification
P26 Main Harness Power Connector
Harness Connector
Battery P26
adapter
Figure 79
Battery P26
adapter
Figure 79
Main P42
Figure 76
Main P42
Figure 76
Description
42 to 64 Vdc Power
Ground
Pin
A
B
1
2
and follow the steps listed.
Raise the Battery Pack and Disconnect the P01
84
Wire Color
Red (R)
Black (BK)
Connector Graphic
B
A
1
2