Toro Greensmaster eFlex 1800 Diagnostic Manual page 66

Battery Harness P01 and P34 Connectors Pin Identification
Pin Identification
1
2
3
4
5
6
Pin Identification
A
B
C
D
E
F
Pass The continuity readings are good. Replace the battery pack. Go to
to Service (page 19)
Fail The continuity readings are not good. Repair or replace worn or damaged parts as required.
Note: Refer to the eFlex Service Manual for this step. In the Electrical System chapter, go to the Lithium
Battery Pack section. Steps 4 through 8 in the Lithium Battery Pack Installation procedure describe how
to connect the battery wire harness P01 connector.
Go to Returning the Equipment to Service (page 19)
Figure 65
Battery Harness P01 Connector
Description
CAN + (High)
CAN – (Low)
48 to 64 Vdc Power
Ground
Battery Pack Wake up
Not used
P34 Battery Harness Machine Connector
Description
Battery Pack Wake up
Not used
Not used
CAN + (High)
Not used
CAN – (Low)
and follow the steps listed.
66
Wire Color
Red/White (R/W)
Black/White (BK/W)
Black (BK)
Blue (BU)
Not used
Wire Color
Blue (BU)
Not used
Not used
Red/White (R/W)
Not used
Black/White (BK/W)
Returning the Equipment
and follow the steps listed.
Red (R)