Pin Identification
Pin Identification
3. Verify that a short does not exist between the following pair of locations:
Location
1
2
Pass
Circuit continuity tested good and no shorts are identified at the listed locations. Go to
the Equipment to Service (page 19)
Fail
For those items that failed, repair or replace worn or damaged parts as required. Go to
the Equipment to Service (page 19)
Note: Do not replace the TEC-2401 unless the fault repeats.
Battery Harness P01 Connector
1
2
3
4
5
6
Battery Harness P04 Connector
POS
P1
P2
S1
S2
NEG
Harness
Connector
Battery
P01
Figure 56
Battery
P01
Figure 56
Description
CAN + (High)
CAN – (Low)
48 to 64 Vdc Power
Ground
Battery Pack Wake up
Not used
Description
48 to 64 Vdc Power
CAN + (High)
CAN – (Low)
Battery pack wake up
Not used
Ground
Pin
3
4
and follow the steps listed.
and follow the steps listed.
55
Wire Color
Red/White (R/W)
Black/White (BK/W)
Red (R)
Black (BK)
Blue (BU)
Not used
Wire Color
Red (R)
Red/White (R/W)
Black/White (BK/W)
Blue (BU)
Not used
Black (BK)
Connector Graphic
1
3
2
1
3
2
5
6
4
5
6
4
Returning
Returning