Toro Greensmaster eFlex 1800 Diagnostic Manual page 53

Pin Identification
A
B
3. Verify that a short does not exist between the following pairs of locations:
Location
1
2
1
2
Pass
Circuit continuity tested good and no shorts are identified at the listed locations. Go to Step
7.2 and follow the steps listed.
Fail For those items that failed, repair or replace worn or damaged parts as required. Go to
Returning the Equipment to Service (page 19)
Step 7.2: Check the battery wire harness for continuity and verify that there
are no short conditions.
1. Disconnect battery wire harness connector P01; refer to
Connector (page 8).
2. Check for continuity between the following pairs of locations:
Main Harness P26 Connector
Harness Connector
Battery P26
adapter
Figure 55
Battery P26
adapter
Figure 55
Main P42
Figure 53
Main P42
Figure 53
Figure 55
Battery Adapter P26 Connector
Description
48 to 64 Vdc Power
Ground
Pin
A
B
1
2
and follow the steps listed.
Raise the Battery Pack and Disconnect the P01
53
Wire Color
Red (R)
Black (BK)
Connector Graphic
B
A
1
2