Toro Greensmaster eFlex 1800 Diagnostic Manual page 11

1
2
1. Main wire harness P34
connector
3. Disconnect the Li+ diagnostic wire harness P04
connector from the battery adapter harness P04
connector (Figure
1. Li+ diagnostic wire
harness P04 connector
4. Move the Li+ diagnostic wire harness away from the
machine.
Connect the Wire Harness Connectors
1. Connect the battery wire harness P01 connector.
A. Align the tabs on the inside of the P01 connector
with the slots in the battery-pack connector
G017235
Figure 12
2. Li+ diagnostic wire
harness P34 connector
13).
Figure 13
2. Battery wire harness P04
connector
(Figure 14). Then, push the connector into the
battery pack connector.
B. Rotate the locking collar on the P01 connector
clockwise until it engages with the battery pack
connector and begins to pull the connector in
toward the battery pack
turning the locking collar another 120 degrees
(1/3 of a turn) clockwise until it locks in place.
3
2
1
g030574
1. Battery wire harness P01
connector
2. Locking collar
2. Connect the Li+ diagnostic wire harness P34 connector
to the main wire harness P34 connector
11
Figure 14
(Figure 15). Continue
Figure 15
3. Battery-pack connector
(Figure
G017358
16).