Toro Greensmaster eFlex 1800 Diagnostic Manual page 29

Main Harness P17 Connector and InfoCenter Pin Identification
Pin Identification
1
2
3
4
5
6
Pass
Circuit continuity tested good and no shorts are identified at the listed locations.
Go to step 4.4.2 and follow the steps listed.
Fail For those items that failed, repair or replace worn or damaged parts as required.
Go to
Step 4.4.2: Verify that there are no short conditions for the optional
wireless hour meter.
Verify that a short does not exist between the following pairs of locations:
Location Harness
1 Main
2 Main
Figure 34
Main Harness P17 Connector
Description
Ground
12 Vdc In
CAN + (High)
CAN – (Low)
Not used
Not used
Returning the Equipment to Service (page 19)
Connector
P01
Figure 33
P43
Figure 35
29
Pin Connector Graphic
5
1
6
1
1
Wire Color
Black (BK)
Pink (PK)
Red/White (R/W)
Black/White (BK/W)
Not used
Not used
and follow the steps listed.
12
7
3