ALLEN-BRADLEY PROGRAMMING OVERVIEW
This section contains programming examples for reading
data from, and writing data to the Frick® Quantum™ HD
control panel from an Allen Bradley (AB) SLC500 proces-
sor. AB RSLogix500 programming software has been used
for the following examples, however, these examples can
also be used for the AB RSLogix5 software.
QUANTUM™ HD COMPRESSOR CONTROL PANEL
COMMUNICATIONS SETUP
General Configuration
CHANNEL CONFIGURATION
The following are representations of the channel con-
figuration screens from the AB RSLogix500 program-
ming software for the SLC500. Enter values as shown
in order to establish communications via AB Protocol.
090.040-CS (JAN 14)
Page 35