Battery Storage And Recharge - Huawei iSitePower-M V100R002C00 User Manual

iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
Alarm Name
Overtemperatu
re
Hardware Fault Major
Communicatio
n Failure
Module
Upgrade
Failure

10.4 Battery Storage and Recharge

Battery Acceptance Inspection
A battery recharge label must be put on the battery packing case to indicate the
latest charge time.
Issue 01 (2022-07-15)
Alarm Causes
Severity
Major The temperature
is high inside the
module.
The EEPROM in
the power
module is faulty,
DSP2 redundancy
protection is
triggered, or the
PFC is faulty.The
EEPROM in the
power module is
faulty, DSP2
redundancy
protection is
triggered, or the
PFC is faulty.
Major The
communications
cable between
the SMU and the
module is loose.
Major The system
experiences a
power failure
during an
upgrade.
Copyright © Huawei Technologies Co., Ltd.
10 System Maintenance
Suggestion
1. Power off and then power
on the module. Check whether
the alarm is cleared. If yes, no
further action is required. If no,
go to the next step.
2. Contact Huawei technical
support to check the module
and return it to the factory for
repair.
1. Power off and then power
on the module. Check whether
the alarm is cleared. If yes, no
further action is required. If no,
go to the next step.
2. Contact Huawei technical
support to check the module
and return it to the factory for
repair.
1. Power off and then power
on the module, and check
whether the module running
information is normal.
If yes, no further action is
required.
If no, contact Huawei technical
support.
1. Upgrade the power module
again and check whether the
alarm is cleared. If yes, no
further action is required.
172