Table of Contents
Advertisement
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
iSitePower-M V100R002C00 User Manual
(MAP05A1, MAB05B1)
●
●
●
●
●
●
●
●
●
●
●
●
●
Battery Installation Requirements
●
●
●
●
Issue 01 (2022-07-15)
Do not touch the energized equipment, as the enclosure is hot.
To ensure personal safety and normal use of the equipment, the equipment
must be reliably grounded before use.
When a battery is faulty, the temperature may exceed the burn threshold of
the touchable surface. Therefore, avoid touching the battery.
Do not disassemble or damage the battery. The released electrolyte is harmful
to your skin and eyes. Avoid contact with the electrolyte.
Do not place irrelevant objects on the top of the equipment or insert them
into any position of the equipment.
Do not place inflammables around the equipment.
To prevent explosions and body injury, do not place batteries in a fire.
Do not place the battery module in water or other liquids.
Do not short-circuit wiring terminals of batteries. Short circuits can cause a
fire.
Batteries may cause electric shocks and high short-circuit currents. When
using the battery, pay attention to the following points:
(a) Remove any metal objects from yourself, such as watches and rings.
(b) Use tools with insulated handles.
(c) Wear rubber gloves and boots.
(d) Do not place tools or metal parts on top of batteries.
(e) Before connecting or disconnecting battery terminals, disconnect the
charging power supply.
(f) Check whether batteries are accidentally grounded. If it is accidentally
grounded, remove the power supply from the ground. Touching any part of a
grounded battery can cause an electric shock. If these grounding points are
removed during installation and maintenance, the possibility of electric shocks
can be reduced.
Do not use water to clean electrical components inside or outside of a
cabinet.
Do not stand on, lean on, or sit on the top of the equipment.
Do not damage the modules of the equipment.
Before installing batteries, check whether the packaging is intact. Do not use
batteries with damaged packaging.
During installation, ensure that the positive and negative electrodes of a
battery are not short-circuited.
During installation, ensure that the screws are tightened properly using a
torque wrench and check them regularly.
After installing the equipment, remove idle packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
8
Advertisement
Table of Contents
