Juniper ACX5048 Manual page 110

ACX5048 and ACX5096 Universal Access Router
Table 44: Interface Specifications for Active Copper QSFP+ DAC Cables (continued)
Product Number Specifications
JNP-QSFP-DAC-10MA Rate
Connector type
Supply voltage
Power consumption
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Related
Documentation
90
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for an ACX5000
Router on page 62
Interface Specifications for SFP+ DAC Cables for an ACX5000 Router on page 77
Interface Specifications for QSFP+ DAC Breakout Cables for an ACX5000 Router on
page 82
40-Gbps full-duplex serial transmission
None. SFPs are permanently attached.
3.3 V
0.058 W
° °
–40 C to 85 C
Twinax
28 AWG
0.3 in. (0.762 cm)
100 ohms
2 % maximum
4.3 nsec/m
10 m (32.8 ft)
Copyright © 2015, Juniper Networks, Inc.