Port Panel Of An Acx5048 Router - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router
Related
Documentation

Port Panel of an ACX5048 Router

20
C0–Use the RJ-45 connectors for 10/100/1000 BaseT. See
Router to a Network for Out-of-Band Management" on page
C1–Use the SFP connector for 1000 BaseX.
USB port for image updates.
Console port (RJ-45) to support RS-232 serial ports.
Field-Replaceable Units in an ACX5000 Router on page 5
Chassis Status LEDs on an ACX5000 Router on page 23
USB Port Specifications for an ACX5000 Router on page 57
Connecting an ACX5000 Router to a Management Console on page 121
Connecting an ACX5000 Router to a Network for Out-of-Band Management on page 122
The port panel of the ACX5048 supports up to a maximum of 72 logical 10 GbE ports
when operating as a standalone router. Forty-eight physical ports(
10 Gbps small form-factor pluggable plus (SFP+) transceivers. These ports can be
configured as access ports. See
Transceivers for an ACX5000 Router" on page 62
DAC Cables for an ACX5000 Router" on page
SFP+ transceivers or SFP+ direct attach copper (DAC) cables. You can use 1-Gigabit
Ethernet SFP, 10-Gigabit Ethernet SFP+ transceivers and SFP+ direct attach copper
cables in any access port.
The remaining 24 logical ports are available for six 40 GbE ports (
support up to six quad small-form factor pluggable plus (QSFP+) transceivers or QSFP+.
Each QSFP+ socket can operate either as a single 40 Gbps port or as a set of 4
independent 10 Ggps ports using QSFP+ breakout cables. The 40 GbE ports can be
configured as either access ports or as uplinks. See
DAC Breakout Cables for an ACX5000 Router" on page
CAUTION: Do not place a copper transceiver in an access port directly above
or below another copper transceiver. Internal damage to the access ports
and router can occur. We recommend either using the top port row exclusively,
or bottom port row exclusively, for copper transceivers.
Figure 9 on page 21 shows the port panel of a ACX5048 router.
"Interface Specifications for SFP, SFP+, and QSFP+
and "Interface Specifications for SFP+
77. All 48 of these ports can be used for
"Interface Specifications for QSFP+
82.
Copyright © 2015, Juniper Networks, Inc.
"Connecting an ACX5000
122.
through ) support
0 47
48 through 53 ) that