Port Panel Of An Acx5096 Router; Router Ports; Figure 9: Acx5048 Router Port Panel; Figure 10: Acx5096 Router Port Panel - Juniper ACX5048 Manual

Related
Documentation

Port Panel of an ACX5096 Router

Router Ports

Copyright © 2015, Juniper Networks, Inc.

Figure 9: ACX5048 Router Port Panel

1
1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
Access Port and Uplink Port LEDs on an ACX5000 Router on page 26
The port panel of the ACX5096 router consists of 96 small form-factor pluggable plus
(SFP+) and 8 quad small-form factor pluggable plus (QSFP+) ports. Physical ports(
through 95 ) support 10 Gbps SFP+ transceivers and normally are configured as access
ports. The eight 40-Gigabit ports (
normally configured as uplinks or Virtual Chassis ports (VCPs). Although the 104 physical
ports of the ACX5096 would map to 128 logical ports using channelization, only 104
logical ports are supported.
Figure 10 on page 21 shows the port panel of a ACX5096 router.

Figure 10: ACX5096 Router Port Panel

1— Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (96)
This topic describes:
Router Ports on page 21
Channelizing Interfaces on page 22
The ACX5096 ports, ( through
0
1 Gbps SFP transceivers
10 Gbps SFP+ transceivers
Chapter 2: Chassis Components and Descriptions
2
3— 40 Gigabit Ethernet ports (6)
through ) support QSFP+ transceivers and are
96 103
3— 40 Gigabit Ethernet ports (8)
) support:
95
3
0
21