Copyright © 2015, Juniper Networks, Inc.
Figure 8: Management Panel Components on ACX5096
1—
Status LEDs
2—
em1–SFP management Ethernet port (
Cage (socket for either 1 GbE copper SFP or
fiber SFP)
3—em0–RJ-45 (1000 Base-T) management
C0
Ethernet port (
)
The management panel consists of the following components:
Status LEDs
ALM–Alarm
Unlit indicates the router is halted or that there is no alarm.
Red indicates a hardware fault, such as a power failure or a system shutdown due
to system over-heating.
Amber indicates a major or minor alarm.
SYS–System
Unlit indicates the router is powered off or halted.
Solid green indicates that Junos OS for ACX Series is loaded on the router.
ID–Identification or beacon
Unlit indicates the beacon feature is not enabled.
Blinking blue indicates the beacon feature is enabled. This feature is enabled using
the
request chassis beacon
Router product number
Management Ports
C0
and
Chapter 2: Chassis Components and Descriptions
4—
RJ-45 console port (
C1
)
5—
USB port
command.
C1
C0N
) )
19