Step: Configuring The Drive In Hw Config - Siemens SIMATIC S7-300 Getting Started

3.7

6. Step: Configuring the drive in HW Config

Procedure
Sequence Activity
1 In the HW catalog, open the tree structure
SIMATIC Technology > PROFIBUS DP(DRIVE) > Drives >
SINAMICS.
2 Select the drive component "SINAMICS S120" from the tree structure of the HW catalog.
3 Drag-and-drop this component to the master system of the
DP(DRIVE).
4 Enter PROFIBUS address "4", then confirm with "OK".
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 03/2008, A5E00480391-03
3.7 6. Step: Configuring the drive in HW Config
Result
The "Properties – PROFIBUS interface
SINAMICS" dialog box opens.
The "Properties - SIMOTION Drive" dialog
box opens.
Learning units
19