Step: Configuring The Axes With S7T Config - Siemens SIMATIC S7-300 Getting Started

3.11

10. Step: Configuring the axes with S7T Config

Important information
In this step, you create your technology objects (e.g. axes) with S7T Config. Use
"Technology Objects Management" to generate a technology DB for each TO. Do not copy
the technology DBs in order to ensure a defined assignment between the technology DB and
its TO.
Procedure
Step Activity
1 In the project navigator, open the tree structure SIMATIC 300(1) > Technology > AXES. Double-click
"Insert axis" to start the axis wizard:
Result: The "Insert Axis" dialog box opens.
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 03/2008, A5E00480391-03
3.11 10. Step: Configuring the axes with S7T Config
Result
Learning units
59