Learning units
3.1 1. Step: Wiring
Set the PROFIBUS address of the SINAMICS
PROFIBUS address on the CU320 directly via the hardware DIP switch is performed in the
following way:
Figure 3-1
①
②
③
12
Schematic representation of the CU320 control unit
PROFIBUS interface
PROFIBUS diagnostics LED "DP1"
PROFIBUS address switch
to PROFIBUS address 4. The setting of the
®
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 03/2008, A5E00480391-03