Learning units
3.10 9. Step: Configuration of the SINAMICS drive with S7T Config
Step
Activity
17
Select the correct motor from the list. To activate the selection option, you must select the "Select standard
motor from list" box.
The motor used in the SINAMICS
supplied documents or the motor type plate (lower motor - blue gear wheel). Select the appropriate motor
and click "Next >".
34
training case is the 1FK7022-xAK7x-xxxx. Check this against the
®
Result
CPU 317T-2 DP: Controlling a SINAMICS S120
Getting Started, 03/2008, A5E00480391-03