Smartgen HGM6000K Series Operating Manual page 20

Num Parameter
P 32 Gens over volt
(P27) warn
P 33 Gens under
(P28) volt warn
P 34 Under speed
(P29) warn
P 35 Over speed
(P30) warn
P 36 Gens under
(P31) freq warn
P 37 Gens over
(P32) freq warn
P 38 Charge
(P33) volt
P 39 Battery over
(P34) volt
HGM6000K Series Automatic Generator Module
HGM6000K Series Automatic Generator Module
Range
(30-360)V
(30-360)V
(0-6000)RPM
(0-6000)RPM
(0-75.0)Hz
(0-75.0)Hz
fail
(0-30)V
(12-40)V
Default
When genset voltage is
over than the point, genset
over warning voltage is
256
active. When the point is
360V, genset over voltage is
disabled.
When genset voltage is
under than the point, genset
under warning voltage is
205
active. When the point is
30V, genset under voltage
is disabled.
When the engine speed is
under than the point, genset
1350
under warning speed is
active.
When the engine speed is
over than the point, genset
1650
over
active.
When genset frequency is
low than the point, genset
47.0
under warning frequency is
active.
When genset frequency is
over than the point, genset
55.0
over warning frequency is
active.
During genset is running,
when
WL/D+ voltage is low than
6.0
this point and remain for 5
seconds,
warning alarm.
When
voltage is over than the
point
33.0
seconds,
voltage signal is active. It‟s
a warning alarm.
ISSUE 2011-06-20 Version 1.7
Remark
warning speed
charge alternator
genset will
genset battery
and hold for 20
battery over
Page 21 of 34
is