Smartgen HGM6000K Series Operating Manual page 19

Num Parameter
P 25 Over speed
(P20) shutdown
Gens under
P 26
freq
(P21)
shutdown
Gens over
P 27
freq
(P22)
shutdown
High
P 28
temperature
(P23)
shutdown
Low
P 29
pressure
(P24)
shutdown
P 30
Low Fuel level (0-100)%
(P25)
P 31 Lose speed
(P26) delay
HGM6000K Series Automatic Generator Module
HGM6000K Series Automatic Generator Module
Range
(0-6000)RPM
(0-75.0)Hz
(0-75.0)Hz
(80-140)° C
oil
(0-400)kPa
(0-20.0)s
Default
When the engine speed is
over than the point and hold
1710 great
genset
speed is active.
When genset frequency is
low than the point, genset
45.0 low
and hold great than 10
seconds is active.
When genset frequency is
over than the point and hold
57.0 great
genset
frequency is active.
When engine temperature
sensor value is large than
this point and remain for 2
seconds,
98 shutdown alarm. When the
value is 140, send out
warning alarm. (It‟s suited
for
sensor only).
When engine oil pressure
sensor value is less than
this point and remain for 2
seconds,
103 shutdown alarm. When the
value is zero, send out
warning alarm. (It‟s suited
for oil
only).
When low Fuel level sensor
value is less than this point
10
and remain for 10 seconds,
send out warning alarm.
When speed is zero and
remain for the delay, send
5.0 out shutdown alarm. When
the delay is zero, send out
warning alarm.
ISSUE 2011-06-20 Version 1.7
Remark
than 2 seconds,
over shutdown
frequency shutdown
than 2 seconds,
over shutdown
send
engine temperature
send
pressure sensor
Page 20 of 34
out
out